Using Classroom A/V Equipment
Please use the links below to navigate to the guide for the specific classroom/venue you’re utilizing.
- Kenan Music Building, Room 1201 (Rehearsal Hall)
- Kenan Music Building, Room 1206
- Kenan Music Building, Room 2030
- Kenan Music Building, Room 2131
- Kenan Music Building, Room 3029
- Kenan Music Building, Room 3030
- Hill Hall 103
- Hill Hall 107
- Hill Hall 201
- Hill Hall 212
- Hill Hall 213
- Person Recital Hall
Kenan Music Building, Room 1201
Turn on
- Connect laptop/device to the input (HDMI/Mini Stereo Plug)
- Press the desired source on the panel (PC for Projector)
- Use the Volume buttons to adjust the Audio Volume.
Turn off
- Press and HOLD the Off button for several seconds until the blue LED lights behind the Off button.
KMB 1201 (Kenan Rehearsal) Hall Wireless Mic
Turn on
- Open the front of the Sennheiser body pack by squeezing the two buttons on the sides and pulling forward.
- Press the On/Off button.
Turn Off
- Open the front of the body pack by squeezing the two buttons on the sides and pulling forward.
- Press and hold the On/Off button.
Troubleshooting
No Video:
- Restart the computer
- Ensure the correct input is selected on the panel
- Reseat any cables
- Verify the projector is powered on
No Audio
- Ensure the rack is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop/Cell Phone
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Kenan Music Building, Room 1206
Turn on
- Press the desired source on the panel
- Power on the Sony Receiver
- Ensure the correct Input source is selected on the Sony Receiver using the Input rotary knob (HDMI, BD/DVD, BlueTooth).
- Use the Volume rotary knob to adjust the Audio Volume.
Turn off
- Press and HOLD the Off button for several seconds until the blue LED lights behind the Off button.
Troubleshooting
No Video:
- Restart the computer
- Ensure the correct input is selected on the panel
- Reseat any cables
- Verify the Sony Receiver is on with the correct input selected
No Audio
- Ensure the Sony Receiver is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop/Cell Phone
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Kenan Music Building, Room 2030
Turn on
- Press the desired source on the panel
- Power on the Sony Receiver
- Ensure the correct Input source is selected on the Sony Receiver using the Input rotary knob (HDMI, BD/DVD, BlueTooth).
- Use the Volume rotary knob to adjust the Audio Volume.
Turn off
- Press and HOLD the Off button for several seconds until the blue LED lights behind the Off button.
Troubleshooting
No Video:
- Restart the computer
- Ensure the correct input is selected on the panel
- Reseat any cables
- Verify the Sony Receiver is on with the correct input selected
No Audio
- Ensure the Sony Receiver is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop/Cell Phone
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Kenan Music Building, Room 2131
Turn on
- Press the desired source on the panel
- Power on the Sony Receiver
- Ensure the correct Input source is selected on the Sony Receiver using the Input rotary knob (HDMI, BD/DVD, BlueTooth).
- Use the Volume rotary knob to adjust the Audio Volume.
Turn off
- Press and HOLD the Off button for several seconds until the blue LED lights behind the Off button.
Troubleshooting
No Video:
- Restart the computer
- Ensure the correct input is selected on the panel
- Reseat any cables
- Verify the Sony Receiver is on with the correct input selected
No Audio
- Ensure the Sony Receiver is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop/Cell Phone
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Kenan Music Building, Room 3029
Turn on
- Press the desired source on the panel
- Power on the Sony Receiver
- Ensure the correct Input source is selected on the Sony Receiver using the Input rotary knob (HDMI, BD/DVD, BlueTooth).
- Use the Volume rotary knob to adjust the Audio Volume.
Turn off
- Press and HOLD the Off button for several seconds until the blue LED lights behind the Off button.
Troubleshooting
No Video:
- Restart the computer
- Ensure the correct input is selected on the panel
- Reseat any cables
- Verify the Sony Receiver is on with the correct input selected
No Audio
- Ensure the Sony Receiver is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop/Cell Phone
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Kenan Music Building, Room 3030
Turn on
- Press the desired source on the panel
- Power on the Sony Receiver
- Ensure the correct Input source is selected on the Sony Receiver using the Input rotary knob (HDMI, BD/DVD, BlueTooth).
- Use the Volume rotary knob to adjust the Audio Volume.
Turn off
- Press and HOLD the Off button for several seconds until the blue LED lights behind the Off button.
Troubleshooting
No Video:
- Restart the computer
- Ensure the correct input is selected on the panel
- Reseat any cables
- Verify the Sony Receiver is on with the correct input selected
No Audio
- Ensure the Sony Receiver is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop/Cell Phone
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Hill Hall 201
Turn on
- Power on the Sony Receiver.
- If the screen does not automatically turn on, power on the Sharp Aquos screen with the remote control.
- Ensure the correct Input source is selected on the Sony Receiver using the Input rotary knob (HDMI, BD/DVD, Bluetooth).
- Use the Volume rotary knob to adjust the Audio Volume.
Turn off
- Turn off the Sony Receiver.
- Turn off the Sharp Aquos screen with the remote control if it does not automatically turn off.
Troubleshooting
No Video:
- Restart the computer
- Reseat any cables
- Verify the Sony Receiver is on with the correct input selected.
- Verify the Sharp Aquos screen is turned on with the correct input selected.
No Audio
- Ensure the Sony Receiver is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop/Cell Phone
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Hill Hall 212
Turn on
- Connect laptop to HDMI input
- Power on the Sony Bravia screen with the remote control.
- Use the Sony Bravia Remote to adjust the Audio Volume.
Turn off
- Turn off the Sony Bravia screen with the remote control.
- Disconnect laptop HDMI.
Troubleshooting
No Video
- Restart the computer
- Reseat any cables
- Verify the Sony Bravia screen is on with the correct input selected
No Audio
- Ensure the Sony Bravia screen is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Hill Hall 213
Turn on
- Connect laptop to HDMI input
- Power on the Epson projector with the remote control.
- Use the Epson remote control to adjust the Audio Volume.
Turn off
- Turn off the Epson projector with the remote control.
- Disconnect laptop HDMI.
Troubleshooting
No Video:
- Restart the computer
- Reseat any cables
- Verify the Epson projector is powered on with the proper input selected.
No Audio
- Ensure the Epson projector is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Hill Hall 103
Turn on
- Plug laptop/device into desired input on the lectern
- Turn on the system by tapping the touch screen and selecting the desired input
- Audio and lights are controlled by the touch panel on the lectern.
Turn off
- Press the Power icon on the touch screen. Confirm Off.
- Disconnect laptop/device from lectern.
Troubleshooting
No Video:
- Restart the computer
- Reseat any cables
- Verify the correct input is selected on the touch screen
- Verify the projector is on.
No Audio
- Ensure the system is powered on from the lectern touch screen.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop
- Select the proper audio output (Crestron) in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Hill Hall 107
Turn on
- Turn on the rack by switching the top right rocker switch to “On”.
- Press the Display “On” button to turn on the projector
- Ensure the HDMI button is lit.
- Turn on the Pioneer receiver and select the proper input.
- Use the Volume rotary knob to adjust the Audio Volume.
Turn off
- Turn off the Pioneer receiver.
- Press the Display “Off” button.
- Turn off the rack by switching the top right rocker switch to “Off”
Wireless Mic
Turn on
- Open the front of the body pack by squeezing the two buttons on the sides and pulling forward.
- Press the On/Off button.
- Ensure the Tascam power amplifier is turned on in the rack.
Turn Off
- Open the front of the body pack by squeezing the two buttons on the sides and pulling forward.
- Press and hold the On/Off button.
Troubleshooting
No Video:
- Restart the computer
- Reseat any cables
- Verify the correct input is selected on the Pioneer receiver
- Press the VGA button on the top for a few seconds. Then, press the HDMI button.
No Audio
- Ensure the Pioneer receiver is powered on.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop
- Select the proper audio output in System Settings or Control Panel
- Reseat any cables
- Restart the computer
Person Recital Hall
Turn on
- Plug laptop/device into desired input on the lectern
- Turn on the system by tapping the touch screen and selecting the desired input
- Audio is controlled by the touch panel on the lectern.
Turn off
- Press the Power icon on the touch screen. Confirm Off.
- Disconnect laptop/device from lectern.
Wireless Mic
Turn on
- Open the front of the body pack by squeezing the two buttons on the sides and pulling forward.
- Press the On/Off button.
- Ensure the Tascam power amplifier is turned on in the rack.
Turn Off
- Open the front of the body pack by squeezing the two buttons on the sides and pulling forward.
- Press and hold the On/Off button.
Troubleshooting
No Video:
- Restart the computer
- Reseat any cables
- Verify the correct input is selected on the touch screen
- Verify the projector is on.
No Audio
- Ensure the system is powered on from the lectern touch screen.
- Verify the proper input is selected.
- Reseat any cables
Audio is coming out of the Laptop
- Select the proper audio output (Crestron) in System Settings or Control Panel
- Reseat any cables
- Restart the computer